|
||||||||||||
 | Hovering will show thumbnail Pop-Up Clicking will show section. |
| Hovering will show thumbnail Pop-Up Clicking will show section. |
|
Pricing applies to Internet orders only!!! Numbers shown are quantities used per assembly. Prices are based on a quantity of one (Each). Order the quantities needed for repair. |
| ORDER QTY |
REF. NO. |
PART NO. / DESCRIPTION | Riva's PRICE |
TRX520FM6 G3 A |
| 1 | 06910-HR4-A21 BEARING SET, NEEDLE |
32.42 | 1 | |
| 2 | 12361-035-000 CAP, TAPPET ADJUSTING HOLE |
12.59 | 1 | |
| 2 | 12361-300-000 CAP, VALVE ADJ. |
12.40 | 1 | |
| 2 | 12361-371-980 CAP, VALVE ADJ. |
12.40 | 1 | |
| 3 | 40215-HM7-000 SPRING, SHAFT |
2.35 | 1 | |
| 4 | 40400-HR6-A61 SHAFT ASSY., FRONT PROPELLER |
110.25 | 1 | |
| 5 | 40402-HR3-A20 JOINT, FRONT PROPELLER SHAFT |
59.47 | 1 | |
| 6 | 40410-HR6-A60 BOOT A, PROPELLER |
9.55 | 1 | |
| 7 | 40420-HM7-A00 BOOT B, PROPELLER |
15.72 | 1 | |
| 8 | 41400-HR5-CC1 GEAR ASSY., FRONT FINAL |
974.55 | 1 | |
| 9 | 41405-HA7-670 RING, STOPPER |
3.62 | 1 | |
| 10 | 41411-HR5-CC1 CASE SUB-ASSY., FRONT FINAL GEAR |
114.57 | 1 | |
| 11 | 41412-HR4-A21 COVER SUB-ASSY., FRONT FINAL GEAR |
277.40 | 1 | |
| 13 | 41521-HR4-A21 GEAR, FRONT PINION (13T) |
120.44 | 1 | |
| 14 | 41527-HR4-A21 SLEEVE, FRONT FINAL CLUTCH |
24.49 | 1 | |
| 15 | 41531-HR4-A21 GEAR, FRONT RING (42T) |
145.78 | 1 | |
| 16 | 41540-HR4-A21 SHIM A, DIFFERENTIAL CASE (0.60) |
2.71 | 3 | |
| 16 | 41541-HR4-A21 SHIM B, DIFFERENTIAL CASE (0.65) |
3.04 | 3 | |
| 16 | 41542-HR4-A21 SHIM C, DIFFERENTIAL CASE (0.70) |
3.20 | 3 | |
| 16 | 41543-HR4-A21 SHIM D, DIFFERENTIAL CASE (0.75) |
3.04 | 3 | |
| 16 | 41544-HR4-A21 SHIM E, DIFFERENTIAL CASE (0.80) |
3.04 | 3 | |
| 16 | 41545-HR4-A21 SHIM F, DIFFERENTIAL CASE (0.85) |
2.71 | 3 | |
| 16 | 41546-HR4-A21 SHIM G, DIFFERENTIAL CASE (0.90) |
2.60 | 3 | |
| 16 | 41547-HR4-A21 SHIM H, DIFFERENTIAL CASE (0.95) |
3.24 | 3 | |
| 16 | 41548-HR4-A21 SHIM I, DIFFERENTIAL CASE (1.00) |
3.07 | 3 | |
| 16 | 41549-HR4-A21 SHIM J, DIFFERENTIAL CASE (1.05) |
2.75 | 3 | |
| 16 | 41550-HR4-A21 SHIM K, DIFFERENTIAL CASE (1.10) |
2.76 | 3 | |
| 16 | 41551-HR4-A21 SHIM L, DIFFERENTIAL CASE (1.15) |
3.16 | 3 | |
| 16 | 41552-HR4-A21 SHIM M, DIFFERENTIAL CASE (1.20) |
3.31 | 3 | |
| 16 | 41553-HR4-A21 SHIM N, DIFFERENTIAL CASE (1.25) |
2.62 | 3 | |
| 16 | 41554-HR4-A21 SHIM O, DIFFERENTIAL CASE (1.30) |
2.84 | 3 | |
| 16 | 41555-HR4-A21 SHIM P, DIFFERENTIAL CASE (1.35) |
3.24 | 3 | |
| 16 | 41556-HR4-A21 SHIM Q, DIFFERENTIAL CASE (1.40) |
3.40 | 3 | |
| 16 | 41557-HR4-A21 SHIM R, DIFFERENTIAL CASE (1.45) |
2.84 | 3 | |
| 17 | 41560-HR4-A21 FORK, FRONT FINAL CLUTCH |
45.55 | 1 | |
| 18 | 41565-HR4-A21 SHAFT, SCREW |
23.89 | 1 | |
| 19 | 41627-HR4-A21 SLEEVE, DIFFERENTIAL LOCK |
43.31 | 1 | |
| 20 | 41661-HR4-A21 FORK, DIFFERENTIAL LOCK |
88.33 | 1 | |
| 21 | 41665-HR4-A21 CAM, DIFFERENTIAL LOCK |
39.76 | 1 | |
| 22 | 41666-HR4-A21 SHAFT, DIFFERENTIAL LOCK FORK |
4.60 | 1 | |
| 23 | 41700-HR4-A21 ACTUATOR ASSY. |
473.24 | 1 | |
| 24 | 42400-HR6-MF1 DIFFERENTIAL ASSY. (42T) |
304.11 | 1 | |
| 25 | 42440-HN5-671 FOLLOWER SET, CAM |
65.55 | 1 | |
| 26 | 42451-HN7-003 SHIM A (1.3) |
2.36 | 1 | |
| 26 | 42452-HN7-003 SHIM B (1.4) |
2.36 | 1 | |
| 26 | 42453-HN7-003 SHIM C (1.5) |
2.36 | 1 | |
| 26 | 42454-HN7-003 SHIM D (1.6) |
2.36 | 1 | |
| 26 | 42455-HN7-003 SHIM E (1.7) |
2.36 | 1 | |
| 26 | 42456-HN7-003 SHIM F (1.8) |
2.36 | 1 | |
| 26 | 42457-HN7-003 SHIM G (1.9) |
2.36 | 1 | |
| 27 | 42461-HN5-671 SPRING, DIFFERENTIAL SIDE CONED |
18.73 | 1 | |
| 28 | 90101-HN8-000 BOLT (8X17) |
1.68 | 11 | |
| 29 | 90102-HR4-A21 BOLT, FLANGE (8X25) |
1.27 | 10 | |
| 30 | 90109-371-000 BOLT, SEALING (8MM) |
3.01 | 1 | |
| 31 | 90102-HR6-B00 BOLT, FLANGE (10X96) |
1.71 | 1 | |
| 32 | 90182-MB2-003 BOLT, FLANGE (10X66) |
10.83 | 1 | |
| 33 | 90244-HA0-000 NUT, LOCK (60MM) |
42.00 | 1 | |
| 34 | 90305-HC0-770 NUT, SELF-LOCK (10MM) |
3.65 | 2 | |
| 35 | 90471-580-000 GASKET (8MM) |
3.40 | 1 | |
| 36 | 90651-HR4-A21 CIRCLIP (OUTER) (45MM) |
1.24 | 1 | |
| 37 | 90652-HR4-A21 CIRCLIP (INNER) (68MM) |
2.56 | 1 | |
| 38 | 90653-HR4-A21 CIRCLIP (OUTER) (17MM) |
0.22 | 1 | |
| 39 | 90654-HR4-A21 CIRCLIP (INNER) (35MM) |
0.75 | 1 | |
| 40 | 91012-KF0-000 CLIP, NEEDLE THRUST BEARING (12MM) |
3.62 | 1 | |
| 41 | 91051-HR4-A21 BEARING, RADIAL BALL (32X58X13) |
13.75 | 1 | |
| 42 | 91052-HR4-A21 BEARING, RADIAL BALL (32X28X13) |
13.75 | 2 | |
| 43 | 91053-HR4-A21 BEARING, RADIAL BALL (45X68X12) |
24.69 | 1 | |
| 44 | 91054-HR4-A21 BEARING, RADIAL BALL (17X35X10) |
6.40 | 1 | |
| 45 | 91055-HR4-A21 BEARING, NEEDLE (12X18X12) |
4.09 | 1 | |
| 46 | 91151-HR4-A21 PIN, DOWEL (5MM) |
0.36 | 2 | |
| 47 | 91251-HR6-MF1 DUST SEAL (51.5X68.2X10.5) |
6.36 | 1 | |
| 48 | 91252-HC5-003 OIL SEAL (22X48X7) |
11.04 | 2 | |
| 49 | 91302-001-020 O-RING (30.8MM) |
4.57 | 1 | |
| 50 | 91302-HM7-A00 BAND, BOOT (D27) |
9.67 | 2 | |
| 51 | 91302-HN5-671 SEAL, PROPELLER |
4.54 | 1 | |
| 52 | 91303-HM7-003 SEAL B, RUBBER |
10.76 | 1 | |
| 53 | 91303-HM7-A00 BAND, BOOT (D20) |
9.67 | 2 | |
| 54 | 91311-MB0-003 O-RING (18.5X2.4) |
2.36 | 1 | |
| 55 | 91351-HR4-A21 O-RING (38MM) |
8.04 | 1 | |
| 56 | 95002-35000 CLIP, TUBE (C6.5) |
0.76 | 1 | |
| 57 | 95005-35001-30M BULK HOSE, VACUUM (3.5X1000) (3.5X660) |
10.15 | 1 | |
| 58 | 95701-06020-08 BOLT, FLANGE (6X20) |
0.40 | 3 | |
| 59 | 41500-HR6-MF1 JOINT SUB-ASSY., FRONT FINAL CLUTCH |
83.55 | 1 |
| Powered by HLSM |
| Copyright © 2026 HLSM, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. For further information, contact HLSM, Inc. Version: 05.28.2025 |
