|
||||||||||||
 | Hovering will show thumbnail Pop-Up Clicking will show section. |
| Hovering will show thumbnail Pop-Up Clicking will show section. |
|
Pricing applies to Internet orders only!!! Numbers shown are quantities used per assembly. Prices are based on a quantity of one (Each). Order the quantities needed for repair. |
| ORDER QTY |
REF. NO. |
PART NO. / DESCRIPTION | AL's PRICE |
TRX420FPE I2 A |
| 1 | 06910-HP5-600 BEARING SET, NEEDLE |
34.62 | 1 | |
| 2 | 12361-035-000 CAP, TAPPET ADJUSTING HOLE |
12.59 | 1 | |
| 2 | 12361-300-000 CAP, VALVE ADJ. |
12.40 | 1 | |
| 2 | 12361-371-980 CAP, VALVE ADJ. |
12.40 | 1 | |
| 3 | 32921-HN5-670 CLIP, ALTERNATOR WIRE |
4.72 | 1 | |
| 4 | 35600-HN7-003 SWITCH ASSY., NEUTRAL |
23.07 | 1 | |
| 5 | 40215-HM7-000 SPRING, SHAFT |
2.35 | 1 | |
| 6 | 40400-HP5-600 SHAFT ASSY., FRONT PROPELLER |
159.40 | 1 | |
| 7 | 40402-HP5-600 JOINT, FRONT PROPELLER SHAFT |
42.24 | 1 | |
| 8 | 40420-HP5-600 BOOT, PROPELLER SHAFT COVER |
8.60 | 2 | |
| 9 | 41400-HP5-L00 GEAR ASSY., FRONT FINAL |
1,119.62 | 1 | |
| 10 | 41405-HA7-670 RING, STOPPER |
3.62 | 1 | |
| 11 | 41411-HP5-L00 CASE SUB-ASSY., FRONT GEAR |
128.84 | 1 | |
| 12 | 41412-HP5-L00 COVER SUB-ASSY., FRONT GEAR CASE |
70.91 | 1 | |
| 13 | 41413-HP5-601 CASE SUB-ASSY., FRONT CLUTCH |
209.20 | 1 | |
| 14 | 41447-HM8-000 SHIM A, PINION GEAR (1.64) |
9.74 | 1 | |
| 14 | 41448-HM8-000 SHIM B, PINION GEAR (1.70) |
9.74 | 1 | |
| 14 | 41449-HM8-000 SHIM C, PINION GEAR (1.76) |
9.74 | 1 | |
| 14 | 41451-HM8-000 SHIM D, PINION GEAR (1.82) |
9.74 | 1 | |
| 14 | 41452-HM8-000 SHIM E, PINION GEAR (1.88) |
9.74 | 1 | |
| 14 | 41453-HM8-000 SHIM F, PINION GEAR (1.94) |
9.74 | 1 | |
| 14 | 41454-HM8-000 SHIM G, PINION GEAR (2.00) |
9.74 | 1 | |
| 14 | 41455-HM8-000 SHIM H, PINION GEAR (2.06) |
9.74 | 1 | |
| 14 | 41456-HM8-000 SHIM I, PINION GEAR (2.12) |
9.74 | 1 | |
| 14 | 41457-HM8-000 SHIM J, PINION GEAR (2.18) |
9.74 | 1 | |
| 14 | 41458-HN0-670 SHIM K, PINION GEAR (2.24) |
20.06 | 1 | |
| 14 | 41459-HN0-670 SHIM L, PINION GEAR (2.30) |
20.06 | 1 | |
| 14 | 41461-HN0-670 SHIM M, PINION GEAR (2.36) |
20.06 | 1 | |
| 14 | 41462-HN0-670 SHIM N, PINION GEAR (2.42) |
4.58 | 1 | |
| 14 | 41463-HN0-670 SHIM O, PINION GEAR (2.48) |
20.06 | 1 | |
| 15 | 41502-HL1-A01 JOINT, FRONT FINAL CLUTCH |
106.81 | 1 | |
| 16 | 41503-HP5-600 SPRING, FRONT FINAL CLUTCH |
3.36 | 1 | |
| 17 | 41504-HP5-600 SPRING, FRONT FINAL CLUTCH LOCK |
6.64 | 1 | |
| 18 | 41505-HP5-600 STOPPER, FRONT FINAL CLUTCH |
1.55 | 1 | |
| 19 | 41506-HP5-600 COLLAR, FRONT FINAL CLUTCH |
31.58 | 1 | |
| 20 | 41521-HP7-A00 GEAR, FRONT PINION (13T) |
154.59 | 1 | |
| 21 | 41527-HP5-600 SLEEVE, FRONT FINAL CLUTCH |
45.20 | 1 | |
| 22 | 41531-HP5-600 GEAR, FRONT RING (42T) |
147.34 | 1 | |
| 23 | 41540-HP5-600 SHAFT, FRONT FINAL CLUTCH |
64.72 | 1 | |
| 24 | 41550-HP5-600 FORK, FRONT FINAL CLUTCH |
85.76 | 1 | |
| 25 | 41631-HC5-000 SHIM A, DIFFERENTIAL CASE (0.50) |
13.79 | 1 | |
| 25 | 41632-HC5-000 SHIM B, DIFFERENTIAL CASE (0.55) |
13.20 | 1 | |
| 25 | 41633-HC5-000 SHIM C, DIFFERENTIAL CASE (0.60) |
13.20 | 1 | |
| 25 | 41634-HC5-000 SHIM D, DIFFERENTIAL CASE (0.65) |
13.20 | 1 | |
| 25 | 41635-HC5-000 SHIM E, DIFFERENTIAL CASE (0.70) |
13.20 | 1 | |
| 25 | 41636-HC5-000 SHIM F, DIFFERENTIAL CASE (0.75) |
13.20 | 1 | |
| 25 | 41637-HC5-000 SHIM G, DIFFERENTIAL CASE (0.80) |
13.20 | 1 | |
| 25 | 41638-HC5-000 SHIM H, DIFFERENTIAL CASE (0.85) |
13.20 | 1 | |
| 25 | 41639-HC5-000 SHIM I, DIFFERENTIAL CASE (0.90) |
13.20 | 1 | |
| 25 | 41640-HC5-000 SHIM J, DIFFERENTIAL CASE (0.95) |
13.20 | 1 | |
| 25 | 41641-HC5-000 SHIM K, DIFFERENTIAL CASE (1.00) |
13.79 | 1 | |
| 25 | 41642-HC5-000 SHIM L, DIFFERENTIAL CASE (1.05) |
13.20 | 1 | |
| 25 | 41643-HC5-000 SHIM M, DIFFERENTIAL CASE (1.10) |
13.20 | 1 | |
| 25 | 41644-HC5-000 SHIM N, DIFFERENTIAL CASE (1.15) |
13.79 | 1 | |
| 25 | 41645-HC5-000 SHIM O, DIFFERENTIAL CASE (1.20) |
13.20 | 1 | |
| 25 | 41646-HC5-000 SHIM P, DIFFERENTIAL CASE (1.25) |
13.20 | 1 | |
| 25 | 41647-HC5-000 SHIM Q, DIFFERENTIAL CASE (1.30) |
13.20 | 1 | |
| 25 | 41648-HC5-000 SHIM R, DIFFERENTIAL CASE (1.35) |
13.20 | 1 | |
| 25 | 41649-HC5-000 SHIM S, DIFFERENTIAL CASE (1.40) |
13.20 | 1 | |
| 25 | 41650-HC5-000 SHIM T, DIFFERENTIAL CASE (1.45) |
13.20 | 1 | |
| 25 | 41651-HC5-000 SHIM U, DIFFERENTIAL CASE (1.50) |
13.20 | 1 | |
| 25 | 41652-HC5-000 SHIM V, DIFFERENTIAL CASE (1.55) |
13.20 | 1 | |
| 25 | 41653-HC5-000 SHIM W, DIFFERENTIAL CASE (1.60) |
13.20 | 1 | |
| 26 | 41631-HP5-600 SHIM A, RING GEAR (0.50) |
7.92 | 1 | |
| 26 | 41632-HP5-600 SHIM B, RING GEAR (0.55) |
9.85 | 1 | |
| 26 | 41633-HP5-600 SHIM C, RING GEAR (0.60) |
7.92 | 1 | |
| 26 | 41634-HP5-600 SHIM D, RING GEAR (0.65) |
7.92 | 1 | |
| 26 | 41635-HP5-600 SHIM E, RING GEAR (0.70) |
7.92 | 1 | |
| 26 | 41636-HP5-600 SHIM F, RING GEAR (0.75) |
3.85 | 1 | |
| 26 | 41637-HP5-600 SHIM G, RING GEAR (0.80) |
7.92 | 1 | |
| 26 | 41638-HP5-600 SHIM H, RING GEAR (0.85) |
7.92 | 1 | |
| 26 | 41639-HP5-600 SHIM I, RING GEAR (0.90) |
7.92 | 1 | |
| 26 | 41640-HP5-600 SHIM J, RING GEAR (0.95) |
7.92 | 1 | |
| 26 | 41641-HP5-600 SHIM K, RING GEAR (1.00) |
7.92 | 1 | |
| 26 | 41642-HP5-600 SHIM L, RING GEAR (1.05) |
12.51 | 1 | |
| 26 | 41643-HP5-600 SHIM M, RING GEAR (1.10) |
7.92 | 1 | |
| 26 | 41644-HP5-600 SHIM N, RING GEAR (1.15) |
7.92 | 1 | |
| 26 | 41645-HP5-600 SHIM O, RING GEAR (1.20) |
7.92 | 1 | |
| 26 | 41646-HP5-600 SHIM P, RING GEAR (1.25) |
7.92 | 1 | |
| 26 | 41647-HP5-600 SHIM Q, RING GEAR (1.30) |
3.55 | 1 | |
| 26 | 41648-HP5-600 SHIM R, RING GEAR (1.35) |
3.55 | 1 | |
| 26 | 41649-HP5-600 SHIM S, RING GEAR (1.40) |
3.53 | 1 | |
| 26 | 41650-HP5-600 SHIM T, RING GEAR (1.45) |
4.64 | 1 | |
| 26 | 41651-HP5-600 SHIM U, RING GEAR (1.50) |
3.58 | 1 | |
| 26 | 41652-HP5-600 SHIM V, RING GEAR (1.55) |
3.62 | 1 | |
| 26 | 41653-HP5-600 SHIM W, RING GEAR (1.60) |
7.92 | 1 | |
| 27 | 41711-HP5-600 CASE, CLUTCH ARM |
10.56 | 1 | |
| 28 | 41712-HP5-600 COVER, CLUTCH ARM |
8.76 | 1 | |
| 29 | 41715-HP5-600 STAY, CLUTCH CABLE |
2.53 | 1 | |
| 30 | 41811-HR0-F00 TUBE, BREATHER (3.5X1225) |
7.60 | 1 | |
| 31 | 42400-HP5-601 DIFFERENTIAL ASSY. |
302.82 | 1 | |
| 32 | 42440-HN5-671 FOLLOWER SET, CAM |
65.55 | 1 | |
| 33 | 42451-HN7-003 SHIM A (1.3) |
2.36 | 1 | |
| 33 | 42452-HN7-003 SHIM B (1.4) |
2.36 | 1 | |
| 33 | 42453-HN7-003 SHIM C (1.5) |
2.36 | 1 | |
| 33 | 42454-HN7-003 SHIM D (1.6) |
2.36 | 1 | |
| 33 | 42455-HN7-003 SHIM E (1.7) |
2.36 | 1 | |
| 33 | 42456-HN7-003 SHIM F (1.8) |
2.36 | 1 | |
| 33 | 42457-HN7-003 SHIM G (1.9) |
2.36 | 1 | |
| 34 | 42461-HN5-671 SPRING, DIFFERENTIAL SIDE CONED |
18.73 | 1 | |
| 35 | 90101-HN8-000 BOLT (8X17) |
1.68 | 10 | |
| 36 | 90101-HP5-600 BOLT, SPECIAL (6MM) |
4.61 | 1 | |
| 37 | 90106-MM9-000 BOLT, FRONT FENDER FIXING |
3.62 | 3 | |
| 38 | 90109-371-000 BOLT, SEALING (8MM) |
3.01 | 1 | |
| 39 | 90129-KF0-000 BOLT, FLANGE (10X77) |
17.48 | 2 | |
| 40 | 90133-HP5-600 BOLT, FLANGE (8X27) |
2.97 | 4 | |
| 41 | 90134-HP5-600 BOLT, FLANGE (10X35) |
4.28 | 2 | |
| 42 | 90242-MB0-000 NUT, LOCK (64MM) |
38.26 | 1 | |
| 43 | 90305-HC0-770 NUT, SELF-LOCK (10MM) |
3.65 | 1 | |
| 44 | 90443-KR0-000 WASHER, NEUTRAL SWITCH |
1.49 | 1 | |
| 45 | 90471-580-000 GASKET (8MM) |
3.40 | 1 | |
| 46 | 91012-KF0-000 CLIP, NEEDLE THRUST BEARING (12MM) |
3.62 | 1 | |
| 47 | 91052-HC5-004 BEARING, RADIAL BALL (29X52X12) |
40.21 | 1 | |
| 48 | 91055-HP5-601 BEARING, RADIAL BALL (32X58X13) |
16.37 | 1 | |
| 49 | 91056-HP5-601 BEARING, NEEDLE (12X18X12) |
7.38 | 1 | |
| 50 | 91062-HA7-672 BEARING, RADIAL BALL (32X58X13) |
31.02 | 1 | |
| 51 | 91252-HC5-003 OIL SEAL (22X48X7) |
11.04 | 2 | |
| 52 | 91252-HP5-602 OIL SEAL (42X58X12) |
27.18 | 1 | |
| 53 | 91254-KS7-831 DUST SEAL (22X28X5) |
10.19 | 1 | |
| 54 | 91302-HM7-A00 BAND, BOOT (D27) |
9.67 | 2 | |
| 55 | 91302-001-020 O-RING (30.8MM) |
4.57 | 1 | |
| 56 | 91303-HM7-A00 BAND, BOOT (D20) |
9.67 | 2 | |
| 57 | 91311-MB0-003 O-RING (18.5X2.4) |
2.36 | 1 | |
| 58 | 91351-HP5-601 GASKET, FRONT FINAL CLUTCH COVER |
4.41 | 1 | |
| 59 | 91352-GAZ-930 O-RING (8.5X1.5) |
2.58 | 1 | |
| 60 | 91352-HR0-F01 O-RING (132X2) |
3.38 | 1 | |
| 61 | 94301-06100 PIN, DOWEL (6X10) |
2.28 | 2 | |
| 62 | 94510-32000 CIRCLIP (OUTER) (32MM) |
1.79 | 1 | |
| 63 | 94520-58000 CIRCLIP (INNER) (58MM) |
3.82 | 1 | |
| 64 | 95002-35000 CLIP, TUBE (C6.5) |
0.76 | 1 | |
| 65 | 95701-06012-00 BOLT, FLANGE (6X12) |
1.66 | 1 | |
| 66 | 95701-08025-00 BOLT, FLANGE (8X25) |
1.97 | 3 | |
| 67 | 96100-62060-00 BEARING, RADIAL BALL (6206) |
27.68 | 1 |
| Powered by HLSM |
| Copyright © 2026 HLSM, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. For further information, contact HLSM, Inc. Version: 05.28.2025 |
