Mike's Cycle Supply
Monday-Friday: 8:00am-5:00pm
Saturday-Sunday: Closed
Saturday-Sunday: Closed
|
||||||||||||
 | Hovering will show thumbnail Pop-Up Clicking will show section. |
| Hovering will show thumbnail Pop-Up Clicking will show section. |
|
Pricing applies to Internet orders only!!! Numbers shown are quantities used per assembly. Prices are based on a quantity of one (Each). Order the quantities needed for repair. |
| ORDER QTY |
REF. NO. |
PART NO. / DESCRIPTION | Mike's PRICE |
400XCW REQ |
| 1 | 59038002000 OIL PUMP SHAFT |
0.00 | 1 | |
| 2 | 59038011010 OILPUMP ROTOR CPL. 10MM G-73R |
31.49 | 1 | |
| 3 | 59038011012 OILPUMP ROTOR 12MM G-95R/003 |
43.49 | 1 | |
| 4 | 58438001000 OIL PUMP GEAR 26-T |
9.19 | 1 | |
| 5 | 59038004000 OIL PUMP COVER L/S |
7.09 | 1 | |
| 6 | 59038003000 OIL PUMP COVER R/S 8MM |
30.69 | 1 | |
| 7 | 0015050163 HH COLLAR SCREW M 5X16 WS=8 |
1.99 | 6 | |
| 8 | 0984050122 AH SCREW DIN6912-M 5X12 |
0.00 | 2 | |
| 11 | 59038041000 OIL FILTER COVER |
13.59 | 2 | |
| 12 | 58038005100 OIL FILTER LONG |
10.11 | 1 | |
| 13 | 59038046100 OIL FILTER SHORT |
7.91 | 1 | |
| 14 | 0402251980 NEEDLEROL.DIN5402 NRA 2,5X19,8 |
0.99 | 1 | |
| 15 | 0402251180 NEEDLE ROLLER DIN5402 2,5X11,8 |
0.99 | 2 | |
| 16 | 58038029000 BANJO BOLT M8X1 |
4.99 | 1 | |
| 17 | 59038029000 JET SCREW "100" M8X1 WS=12 |
7.39 | 1 | |
| 18 | 0603082121 SEAL RING CU DIN7603- 8X12X1 |
2.99 | 4 | |
| 19 | 59038035000 OIL LINE STEEL CASE-CYL.HEAD |
31.49 | 1 | |
| 20 | 0770400025 O-RING 40,00X2,50 NBR 70 |
1.99 | 2 | |
| 21 | 59038017000 PLUG M20X1,5 WS=13 |
7.59 | 1 | |
| 22 | 59038016000 OIL SCREEN 15X83MM |
6.79 | 1 | |
| 23 | 0770125015 O-RING 12,5X1,5 NBR |
1.99 | 2 | |
| 24 | 0770020170 O-RING 17,17X1,78 GLO |
1.99 | 1 | |
| 25 | 58038007755 STOP DISK 8,1 X 15 X 0,5 |
1.99 | 1 | |
| 26 | 0799060000 TAB WASHER DIN6799-RS 6,0 |
1.99 | 1 | |
| 27 | 58405098000 RUBBERBUFFER 8X17X10 SILENC |
2.99 | 1 |
| Powered by HLSM |
| Copyright © 2023 HLSM, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. For further information, contact HLSM, Inc. Version: 03.11.2023 |
